WEDZE MEN’S SKI JACKET – FR100

Our designers developed this jacket for occasional Freeriders. Discover freeride skiing while keeping warm and dry in all conditions.Discover freeride skiing with peace of mind. 100% taped seams, ventilation zips, 150 g/sqm wadding (chest) and 60 g/sqm (arms), 3D mesh. All of this to keep you warm and dry!

Additional features

Hood over helmet designed to offer maximum protection ensuring freedom of movement.
Adjustable to fit 3 sizes in a single movement, using a tightening system located behind the head.
Tightening on the wrist and cuff to keep air and snow out.
Tightening at the bottom of the jacket and snow skirt to also prevent air and snow from getting in.

Component waterproofing

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A fabric with a waterproof rating of 5000 mm is therefore resistant to the pressure exerted by a 5000 mm column of water

Water repellency

Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.

Breathability of a component

To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard).
The lower the fabric’s resistance, the more water vapour generated by physical activity can escape and the higher the fabric’s breathability.
For example:
RET < 9 = extremely breathable fabric
/ 9 < RET < 12 = very breathable fabric /
12 < RET< 20 = breathable fabric
/ RET > 20 = little or no breathability

What is a membrane or coated component?

The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. The membrane is a kind of very thin plastic film (polyurethane) that requires a lining to protect and make the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more durable and often more breathable than a coating.

How do we make a garment waterproof?

The waterproofing of the garment is related to its fabric, seam sealing and assembly design.
Using a waterproof zip or adding a flap on the zips (covering the zips with a waterproof fabric flap).

Waterproofness/Shower test

This garment has been validated in a shower test under 60 L of water/sqm/hour for 2 hours. This test reproduces the conditions of a rain shower in the mountains.

How do we make a garment breathable?

In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

Your product is repairable.

This product is repairable.
We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store.
If, however, we can’t repair your product (non-repairable production defect), you can exchange it or get a refund.

What is the RECCO® system?

All our Freeride jackets and trousers are equipped with the RECCO® system.
With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.

Tutorial on how to wash your waterproof garment.

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment.
Link: https://youtu.be/rh4GLwALgBM

After three washes, restore the water repellent properties with a waterproof spray or wash-in product.

To help you choose the right size

The model is wearing a size L and measures 180 cm.
Measurements:
Waist size: 85 cm
Hip measurement: 100 cm
Chest size: 100 cm

Weight

1.06 kg in size L